The Ugly Reality About Kia Picanto Key Replacement
How to Fix a Dead Kia Picanto Key Fob
The Kia Picanto is a city car that can swerve through traffic gaps and width limits as if they weren't there. It is a compact car that comes with many features.
There are many reasons that the key fob on your kia Picanto may not work. A dead battery is probably the most common cause.
Dead Coin Battery
The most common reason that a Kia Picanto key fob stops working is a dead or dying battery. Usually, the key fob will display warning signs prior to dying and loses range or erratic behavior. It is recommended to replace your battery if you observe any of these symptoms before the battery has completely failed. Choose a replacement battery that has the same voltage, size, and specification as the original.
If the key fob still not working, you might be required to take it to a dealer. This is the only way to be sure that the replacement is programmed correctly and compatible with your vehicle. The process of reprogramming keys without following the proper procedure could harm the chip's internal components and result in it not functioning.
Another possibility is that the receiver module has developed an issue. This could be caused by a chip that has been damaged, or wear and tear. It isn't always easy to spot the signs of this issue, however it's important to investigate immediately. If you are unable to get your key fob to lock or unlock the doors, or if even the spare won't work then it's time to call a dealership or service center to get help. They will be able to determine the issue and fix it for you.
Faulty Chip
The key fob has an electronic chip that sends a signal to a computer within the car. If the chip is damaged and the code cannot be properly transmitted and the immobilizer will be activated. This can be caused by various reasons. One of the causes is an insufficient battery in the key fob. Another possibility is water damage. If the fob becomes wet, it's likely that it will cease to function.
A faulty chip could also be the cause of why the Picanto fob doesn't turn on the engine. If you've replaced the battery, reprogrammed the fob but it still doesn't function the circuit board might be damaged. You'll need to replace the circuit board if this is the situation.
Press the button on the back to open the fob. Once this is done you will be able to take off the mechanical key. You can then follow the steps below to replace the key fob battery. Be sure to use the correct battery with the same size and voltage. If you use the wrong battery could damage the Fob. Press the lock button after replacing the battery. If it works, then you've got a fantastic Fob.
Faulty Receiver Module
Your key fob takes a lot of abuse and isn't impervious to destruction. As time passes, its contacts with batteries and buttons may get damaged and stop functioning properly. Luckily, it's pretty easy to fix this on your own with some simple tools.
To work, the fob has to send a signal through a receiver in your car. If the module is not functioning properly, your fob won't be in a position to open or start the car. There are a variety of possible causes of this problem, but the first thing to do is reset the fob.
This is done by disconnecting and leaving the battery at 12 volts drain completely. Connect the negative and positive cables by reversing their order.
If the battery is in good shape and the fob doesn't have any water damage, the issue might be with the signal. It could be due to various factors, such as interference from nearby transmitters and objects that operate on the same frequency band as Picanto's Receiver.
Key fobs come with rubber seals that prevent the electronic chip from becoming wet. However should they be submerged in water, the chip could be destroyed. It's crucial to keep your key fob dry of the water and only use key fobs with waterproof designs.
Poor programming a kia key fob
A Kia Picanto key fob is an ideal way to open and start your car. You can also use it to control your vehicle's features. It is important to know how to utilize the key fob in a safe manner, especially when driving in adverse weather conditions or if you have a limited mobility. Fortunately, there are plenty of kia picanto spare key Picanto key fob tricks to assist you in this!
If your key fob suddenly stopped functioning it could be due to an issue with the internal chip. It is rare however, it is possible. To determine the cause, it is best to talk to an 2014 kia optima key fob dealer.
You could also try to reset the Picanto keyfob. The process is simple and can be performed at home. The first step is to take off the key fob. Connect the diagnostic device under the dashboard to the OBDII connector and then start the engine. The diagnostic tool will be asking you for information regarding the Picanto. This includes the VIN, make, and model.
You can also check for a dead battery. The metal clips in the key fob secure the battery and complete the circuit. If the retaining clips are loose, they can interrupt the flow of electricity and result in a loss functionality.
