12 Companies Leading The Way In Patio Door Lock Repair
Patio Door Lock Repairs
Over time, wear and tear can lead to lock malfunctions. There are a few easy steps you can follow to restore the security of your upvc patio door repairs near me door.
These simple fixes can make your home safer regardless of whether you re-align the lock or clean the mechanism.
Clean the Lock
Patio doors are fantastic for bringing the outdoors in and keeping out the elements. However they can pose a security threat in the event that the lock isn't working correctly. Over time wear and tear, hot and cold weather, dirt and debris can take their toll on the lock on your patio door and cause it to become difficult to open. With a little care you can ensure that your patio door's lock is always working properly.
In the beginning, it's essential to clean the lock on your patio door and all of its moving parts. This helps flush out any accumulated grime and coatings that could hinder the lock from functioning as it should. Begin by wiping down all the moving parts of the lock for your emergency patio door repair door with a wet cloth. Then apply a scouring pad or a damp, rough cloth to scrub the dirt-infested areas of the frame and door. You should then wipe down the entire lock with a dry cloth to remove any remaining dampness, and allow it to dry completely before making use of it again.
If your patio door is equipped with pin-tumbler latches, you can lubricate it by applying powdered graphite to the key. You can also apply a Teflon oil like WD-40 Multi-Use Product. This kind of lubricant can be applied quickly and does not dissolve over time. If you're unable to find the right lubricant for your lock, apply a pencil that has a larger tip. Put the pencil into the lock and move it around to distribute the graphite.
Tracks for sliding patio doors require regular maintenance to keep them free of dust, dirt and other debris. These tracks are especially susceptible to snow, ice, and other particles, which can cause them jam or bind. This could make it difficult for your patio door to be opened and closed.
You can clean the track rails and rollers on sliding patio door track repair doors by removing any damaged or dirty weather stripping. Clean it, then replace it. The same is true for rollers on patio doors, which can be wiped down and then sprayed with a non-stick lubricant that will allow them to move freely.
Lubricate the moving parts
uPVC French Doors, like sliding patios, are operated using 3 to 4, or occasionally 5 point locking mechanisms. They include the lock cylinder and handle that is operated by keys. They require maintenance and the lubrication of moving parts. This can be done using an oil that is thin, but never WD40. It should be done at least once per year.
If hinges that are sagging don't cause the issue, it could be that the door is not aligned. It could be rubbing against or catching the strike plate's opening in the frame. Remove the strike plate, and use a sharp tool to increase the size of the mortise. This lets the latch sit properly in the hole, and also prevents scratching or catching on the frame.
Measure the width of the cylinder with an object of book or wood that is able to fit into the space above the adjustment screw. The outer dimension is the distance from the outside of the door to the center of the cylinder. the inner dimension extends from the center of the adjustment screw until the end of the cylinder.
Verify the width of the lock.
If your patio door latch is difficult to turn, even after cleaning and oiling, it's possible that it's not aligned with the strike plate. Make sure that your door is balanced, and if the hinge screws are secure. In most instances, moving the strike plate upwards or downwards can fix the problem.
The most common issue is when the lock's strike is too small for the latch to engage. In this case, you'll need to enlarge the opening using the hammer or chisel and then test the latch to make sure that it contacts the strike plate without rubbing against or catching on the door's frame jamb.
Before purchasing a new lock, you should first determine what kind of mortise lock you currently have. This can be done by looking at the faceplate and determining if it is round or square. Then, take a look at the screw holes on the existing lock and note the dimensions of each one. This information will allow you to find the replacement lock that has the exact same width and will fit in the hole you have already.
You'll need to identify the mortise lock, and then examine it for any scratches, bends or other damage that need to be repaired. A badly damaged or bent latch is more prone to break than one that's not used much, so be sure to replace the lock with a brand new secure and safe version if you find any signs of damage or wear.
Once you've checked the lock and decided on the type of replacement you need now is the time to start working on the actual repair patio door. Remove the handle and spindle from the patio door, and then insert the new one. Start by putting in the handle inside and aligning it with the spindle and then securing it in place by using the two screws or bolts that secure it. Once the interior handle is installed, put in the handle on the outside and screw it into the position as well. Once you have completed these steps Test the handles to ensure that they can be shut and open easily and that the latch is in contact correctly with the strikeplate.
Check the door's Strike
The strike plate and door latch are two parts which work together to secure the door. If they are not aligned properly, the latch won't latch the door properly. Fortunately, the issue is often easy to fix.
Check the receiving holes of the strike plate to ensure they are free of obstructions, such as dirt or plastic plugs. Release the screws that hold the strike plate in position. This will allow it to move vertically but it will not be able to separate from the frame. Then adjust the strike plate until its holes for receiving align with the latch hooks on the door latch. After the strike plate has been adjusted then tighten the screws and test the door to see whether it shuts easily with the new adjustment.
Door strike plates can be difficult to locate for homeowners with sliding patio doors, but they're crucial to lock and unlock your door. The metal plates are typically located at the top and bottom of the door jamb which is where they are used to support the door's latch. Then, the door latch is placed on the strike plate to create the seal when it is closed. If the strike plate is damaged, rusted, or not installed correctly, it may prevent the latch from locking the door securely.
The most common reason for the patio door lock to become stuck or not close is a misalignment of the latch and the strike plate. The easiest way to check for this is with the "lipstick test." Apply some lipstick on the edge of the deadbolt, and then attach masking tape over it. The lipstick will leave an impression when you close the door. This will show you exactly where the latch meets the strike plate. If the mark is too low or high you can easily adjust the strike plate.
Locks for sliding patio doors help protect your home from intruders, and if they're not working properly, you need to solve the issue fast. Follow these steps to fix your patio door lock and restore it's function.
