Do Not Make This Blunder With Your Ghost Immobiliser 2
Ghost Immobiliser 2
Guards your vehicle against key cloning and stops thieves from driving it using your original keys. Our latest immobiliser is connected to your vehicles CAN data network & the unique PIN code needs to be entered in order for the engine to start.
Ghost, unlike trackers, does not emit radio frequency signals and cannot be detected by diagnostic tools. It does not have any LED indicators or buttons to signal its presence in your van or car.
Anti-key Cloning
The ghost tracker installation immobiliser has been designed to stop key hacking and cloning. This device is connected to your vehicle's CAN data network and creates an unique pin code by using the factory buttons on your dashboard and steering. This will stop the thief from being able to start your vehicle. If the wrong PIN code is entered, your car cannot be started which makes it impossible for them to drive away with your joy and pride.
Ghost immobilisers are new technology that is extremely hard for thieves to beat. Unlike physical deterrents like wheel locks and steering locks that can be cut or taken the ghost immobiliser is a discreet electronic device that can't be easily detected by regular thieves since it doesn't emit any radio signals and works silently.
The next-generation immobiliser protects your vehicle from a range of threats, such as key-hacking, relay attacks and duplicate copies. It also stops thieves from stealing keys or replacing your ECU since it will not allow them to start the car without first entering the correct PIN code.
The ghost immobiliser 2 unlike other immobilisers, it does not require the use of a remote control or key fob to operate. It is deactivable by using an app on the smartphone of the driver. This is ideal the time you have to give your car away for valet parking, or for servicing without the key fobs.
The Autowatch Ghost-II is the latest evolution of our ground-breaking ghost immobiliser. It was designed to be as easy and convenient to use as it is possible, while remaining as secure as ever. This is achieved by linking the Ghost-II into the vehicle's data network CAN, which means that there aren't any additional wires to hide or be easily found. It comes with a built-in feature which allows you to disarm the Ghost-II simply by connecting it to your vehicle's Bluetooth.
OBD port hacking
OBD port hacking is the most recent method employed by professional car thieves. Thieves can access your vehicle's OBD port with no more than a laptop, an application and a few cables that can be purchased online for under PS50. Once they have access, they are able to do anything they want including resetting your vehicle's fault codes to tuning your car, or even stealing it within a matter of minutes.
If you have a Ghost immobiliser fitted it can prevent your car from being stolen using this method by needing an unique PIN code sequence is entered on the fob of your key in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. It is not detected by any scanning technology, RF or code grabbing. It also has a Service/Valet Mode that allows your vehicle to start without requiring a PIN code.
You'll also require cables with OBD pins, which are connected to the CAN bus. These cables are available on eBay or Amazon for around PS50. You will also need a cable with OBD pins that connect to the CAN bus, these can be found on Amazon/Ebay for about PS50. The next step is to connect the cable into the wire harness of your car for example, the radio wiring harness.
Once the hacker has established a connection to your vehicle's OBD port, they can send diagnostics requests to the system at high baud rates which will crash the CAN, and prevent systems within your car from working. This could cause your car's engine to stall or even shut down.
No additional remotes or key fobs are required.
The car immobiliser is a fantastic piece of anti-theft technology that is used by billions modern vehicles across the globe. An aftermarket immobiliser protects your vehicle by using engine ECU software that stops cars from starting if the transponder is false.
It is possible for a criminal in the event that they know the code to deactivate an immobiliser, to disable it. The batteries in the majority of key fobs can be removed by prying it open and a burglar can use a simple tool to remove the immobiliser's inner circuit board and replace it with an empty. They'll then be able to start your car.
With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser communicates with engine ECU (Engine Control Unit) through a discreet quiet CAN data circuit that is undetectable with diagnostic tools like the ones employed by high-tech thieves. It also does not make use of a traditional key-fob that has LED indicators, which means it's not visible at sight.
You may have to turn off Autowatch's Ghost 2 protection at times like valet parking or a service job. Ghost CAN immobilisers feature a mode called "Service Mode,' which you can activate with the push of a button on your phone. The car is still operational however, the maximum speed is restricted to 36mph.
Contact us today to arrange a demonstration at our workshop. A member of our team will explain the process and provide you with your Ghost 2 emergency card, installation certificate, and security guarantee.
Simple PIN code change process
Ghost is the next-generation device that protects your vehicle without cutting wires or installing key fobs from an aftermarket. It is directly connected to the vehicle's CAN data network. A personal PIN can be created using buttons on the dash and steering wheel. The device doesn't emit RF signals, therefore it cannot be bypassed. This makes it difficult to detect by sophisticated scanning and RF techniques used by modern thieves.
The PIN code sequence can be altered whenever you wish to lock out prior drivers, and it even has an override code in the event of a sequence that what is a ghost immobiliser not remembered. During installation, the installer will demonstrate how to do this. The system has a valet-mode feature that can be used to temporarily disable pin input sequences so that your garage or mechanic can work on the vehicle without having to know the pin number. This is a great option for those who don't wish their pin sequence to be revealed but still want to leave their car with valet parking or service.
Contrary to Thatcham products that require additional key-fobs to operate, Ghost is a discreet system which takes advantage of the buttons on your car to create a unique interchangeable PIN code sequence. This sequence is entered using the smartphone app, meaning no extra LED indications are thrown and your car is secure and safe from the possibility of being disabled by hackers or any other technology.
Tested for every vehicle
In contrast to key fobs that require you to press buttons, a ghost immobiliser is hidden under your dash or steering wheel so that only you know it's even there. The device is connected to your vehicle's CAN network, and a PIN code can be programmed by using the buttons on your car. The system won't allow your vehicle to start until this code is entered. This means that thieves are unable to duplicate the keys on your car or access the OBD port to gain access to your vehicle.
local ghost immobiliser installer can be installed in any vehicle, including electric vehicles, motorhomes, vans and bikes. It's also incredibly versatile and can be programmed to turn off in a variety of situations. It is possible to program it to go into Valet mode, for instance when the vehicle is transported to a valet company or parking company. This means that your car can be operated within a set 30mph speed limit. The ghost car immobiliser immobiliser will be activated once it is returned to your home.
The device can be reset at anytime to your personal PIN code. This is great in the event that you forget the code or if the device becomes unusable.
It's also worth noting that the device is completely inaccessible to those who aren't familiar with it. This is because it runs through the buttons on your car's dashboard and steering wheel, and utilizes the information they send to identify which button has been pressed. This makes it a secure and reliable security option that isn't affected by jamming, RF scanning, or door lock pick sets.
