Ten Patio Door Repair Myths That Don t Always Hold

tilt and slide patio door who repairs sliding patio doors near me (my latest blog post)

Patio doors are a convenient way to move from the inside to the outside, whether you're entertaining friends or enjoying time outside. If your patio door isn't moving smoothly, you may need to adjust it.

Locate the adjusting screws on the bottom rail and remove the plastic plugs to raise or lower the door. Check that the door is even and smoothly moving (Photo 1).

Window Treatments

Consider light control, privacy and aesthetics when choosing window treatments for sliding doors. Do you wish to stop natural light from shining on your furniture or artwork? Or do you prefer that the sunlight is only allowed to enter when the sun is not too low in the sky.

You can also create a unique appearance by selecting the appropriate window treatment. If your sliding patio door is a single glass pane, you can make use of mullions to separate it into smaller panes for a more decorative appearance. Window treatments can be made from hard or soft materials and include anything from curtains, drapes and valances, to cellular shades and roller shades as well as wood shades that are woven. They can be combined with other window treatments, such as a swag, or used on their own.

One of the most sought-after types of window treatments for patio doors is vertical blinds, with wide fabric panels, also known as vanes. They can be opened and closed by tilting, allowing you to limit the amount of light that enters your home. They can be operated with a wand or a cord and chain.

Another option for sliding patio doors is a window film that provides energy savings and glare control. They can be integrated into your sliding door, or used as an alternative to window treatments, for example cell shades.

For a more traditional appearance it is possible to choose an swag or valance to cover your sliding patio door repair service near me door. These are available in a range of fabrics and colors, as well as classic tabs, pinch pleats and grommet styles. You can also purchase them with a blackout lining for more privacy and light control.

Remember that patio doors must be able to slide open and close. It is recommended to hang window treatments at a height so that they can perform this purpose. This will keep them out-of-reach for pets and children.

If your window treatments aren't in the shape of a drape or have no rod pocket, you can use a traverse bar to allow them to move horizontally across your sliding doors. Hang them about an inch above your patio doors so they don't touch heads.

Rollers

If your patio door starts to sound squeaky, it's most likely to be due to worn rollers. The rollers, located at the bottom of the door, allowing it to slide down a track, can become stuck or rust with time. This could make it difficult to open and shut the doors, and can cause loud noises while in motion. There are several ways to repair your sliding door so that it will slide and close again.

You can start by lubricating the tracks. This will allow the door to move more smoothly and it should be done at least twice per year. A quality lubricant can be bought at your local hardware store. If you have vinyl tracks you can use a silicone spray. If you have wooden tracks, use an oil-based lubricant made of wax. If the lubricant doesn't work, you may need to replace your rollers.

You can also adjust the rollers. This is a task that requires two people, as you will need to lift the doors, and then locate the screws in plastic on the bottom of the track. The screws have a small plug which needs to be removed with the screwdriver. Then, you can turn the screw to raise or lower the rollers and allow the door to come in contact with a lesser amount of the track.

Another reason to consider is the door not properly seated in the track. This can create a gap between the door and the frame. This can allow cold air to enter on a cold day or hot air to escape on a hot day. If this is the case you'll need to remove the frame and door to determine what's causing it to open.

If the gap is caused by the track, you can repair this by removing the top layer of the track and then fixing it. The gap can also be fixed by installing a new set of tracks that will give the door something to rest against it is used.

Tracks

If the doors aren't closing or opening quickly, it's time to lubricate your tracks. It's a simple task that can improve the performance of your patio doors.

Remove the door and set it on a flat surface out of the way as you work. It might be necessary to ask someone else to assist you in lifting the door up and hold it as you work. With a brush and hot soapy water, thoroughly clean the sliding door's track. If the doors have blinds on the glass, be sure to clean them as well.

For Next Dimension vinyl patio doors, dirt and dust can build up near the tilt and raise/lower controls, impacting operation. If your door is equipped with these, ensure that you regularly clean the surface with a vinegar and water solution or a regular window cleaner.

Signature and Pro patio door include an antilift block in their head pockets. They require a 3 to 6 inch opening to remove this feature and lower the sill track. Slide the sash or panel to the open position and then lift up on it, allowing it to tilt it backwards to clear the sill pocket, let the track lower from the head jamb. Repeat the procedure on both sides of the sash/panel.

Glass

If the glass on your patio door is damaged, it could cause a variety of issues. It can prevent sunlight from entering the home, and can make the area inaccessible until the glass is replaced. Glass that is cracked can be dangerous, since it could break and cause injuries if someone gets hit in the head with shards.

Fortunately, it's fairly easy to repair damaged doors and frames. The first step is to clean the glass and remove any dust or dirt that's accumulated over time. After cleaning the glass, you can apply a clear coating to protect it from the elements. You can also add a decorative film to the door to improve its privacy and aesthetic.

If your sliding glass door isn't moving smoothly, it could be due to an improperly aligned roller. It is typical to find adjustment screws at the bottom of the door, which are usually covered by trim caps. If you are unable to locate the screws, you can try lifting or lower the door until it looks even on the track.

Before you attempt to fix the sliding patio door repairs glass door ensure that you have the necessary tools. You'll also need an awl and a screwdriver, as well as some caulk or plastic putty. You'll also need to move furniture away from the door so you are able to work on it easily. You can also place blankets or foam sheets under the door to shield it from scratches when you remove it and replace it.

Our engineers will determine the name of the manufacturer when they arrive at the site of work. This is usually done by removing the cover on the actual rollers (bogies) that are situated at the bottom of the door. You can also look for a label inside the side panel or on the handle. If you cannot find the label, it's best to contact the manufacturer.