15 Undeniable Reasons To Love Upvc Window Replacement Hinges
Choosing Upvc Window Replacement Hinges
It's not as difficult as it could appear to choose and install Upvc replacement hinges. Check that the hinges' arrows are facing the correct direction and determine the thickness of the hinge arms on the frame opening (13mm or17mm).
There are many different types of hinges to choose from, each with distinct characteristics. This article will review some of the most commonly used uPVC hinges, as well as their benefits.
Egress/Easy Clean Hinge
They are a great option to replace or upgrade your fire escape window as they open to a full 90-degree angle. They can also be removed to an 'easy clean' position to allow you to easily reach the outside of windows to clean them without having to climb a ladder or lean over at potentially dangerous angles.
These heavy duty egress hinges are manufactured by Yale one of the most well-known and respected home security brands on the market today. These hinges are suitable for any kind of uPVC side hung window. By pressing a tiny button, the window sash will be slid to the side and into the clean position. After closing, the sash will automatically reset to its original position.
They are available in both 13mm and 17mm stack heights. Depending on the size of your existing window, we suggest using our Egress Selection Guide to determine which product is best for your needs.
These hinges are designed to be used in conjunction with a standard side-hung frame that is made of aluminium or uPVC. They are equipped with an easy friction screw that can alter the amount of resistance generated. This allows for easier opening of the window and reduces the possibility of a mishap during high winds. They have been cycle tested to more than 30,000 cycles and are compliant with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
There are no buttons or catches There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is easy to use and provides a simple solution for emergency egress and secure cleaning. Use the hinge retention clip located on the inside of the bottom corner. This will release the top and bottom catches, allowing you to slide the sash back into the clean position. Once you are in the clean position close the window to reset the hinges back to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace side opening windows for egress (fire safety) reasons. These hinges allow for a larger opening in the event of a fire. Building regulations require that this type of hinge has to be set in any space that is habitable and has windows.
They have an exclusive friction stay hinges stopper that allows the window to be opened to a 90 degree angle and also allows the sash opening to slide across the glass when it is open for easy cleaning of the outside of the glass without having to climb ladders. The hinges aren't flimsy buttons or catches and operate with a simple, safe lever that can be accessed from inside the home.
The hinges, made in the UK by Cotswold and Cotswold, have a child safety feature for daily use. It can be reverted with a hidden button. You'll have peace of peace of mind knowing that your children will not accidentally open the windows too far. The stack heights are 13mm or 17mm.
Measure the length of the existing side-hung window hinge that is fixed to the frame. (See the article on measuring the length of upvc window hinges). Then, select the appropriate size hinge from the selections below.
Note that this measurement is taken at the hinge's point that connects to the frame, not the sash. The actual length of the hinge may be shorter or longer depending on how your windows were made in the past. When choosing the size of the hinge, most frames made of upvc will have the 13mm stack height however if your original window frame is 17mm, you should select this option. You can also install the 4mm packer to make up the difference. All the hinges are supplied with two hands (1 left and 1 right). The hinges do not include screws. If required, these can be purchased separately. We recommend using our upvc window hinge repair window Hinges screws. These are specially designed to enhance the performance of your hinges, allowing them to operate smoothly for a longer time. They feature a less friction design and an improved weather seal with a new nylon reducer cap.
Restricted Hinge
There are occasions when windows must completely open, and this can be a challenge using the standard hinge. These child safety hinges are a solution to this problem and provide a solution when ventilation is required but access to clean up or escape in the case of fire isn't possible. They work by restricting the amount the sash can open, and allow for the control of this limitation with an option. They are available in 13mm and 17mm stack heights. They can be used for both side and top hung windows.
The Nico Restricted Egress Hinges combine the features of both a standard restrictor and a pivot for fire escape to offer a simple and efficient method of complying with building regulations. It is suitable for side-hung and top opening uPVC windows and is available in 13mm and 17mm stack heights. It comes in a pair with one hinge being the restricted egress, and the other being the unrestricted. This lets one hinge be installed at the bottom while the other is set on top.
These uPVC hinges are made to be used with windows that aren't able to be fully opened, for instance the bedroom of a child. The mechanism restricts the distance the sash opens to 100mm in a safe distance and then re-engages when the window is closed.
Like the other kinds of uPVC friction bifold doors hinges that are available, these hinges can be used on all styles of windows and are suitable for difficult to reach windows above ground level three-storey flats and those that would normally require a ladder for access to them. They can be improved with our range security enhancements, like hinge guard protection plate or dog bolts, in order to achieve PAS 24 performance.
It is important to measure the hinge on your current window in order to get replacements of the same size. This can be accomplished by looking at the picture gallery of the hinge before deciding where you would like it to be. The top-hung hinges can only be positioned on one side, while the side-hung hinges can only be placed on one side.
Standard Hinge
A standard hinge uses metal-to-metal contact and no extra parts to reduce friction. It is available in a variety of finishes and also comes with an NFPA-certified fire rating. To quickly determine the radius of a hinge, lay it out flat and align a quarter and dime in two corners. If the dime fits better and the corner is round by 1/4 inch; if the quarter fit better, it's rounded by 5/8 inch.
The proper hinge can enhance or break the appearance of your door. Matching the style and finish of the hinges to your door will give it an attractive and cohesive design.
