A Guide To Saab 9-3 Key Replacement From Start To Finish

How to Replace the Replacement Key Battery For the saab fob key replacement 9-3

Saab owners must follow a set of steps that are unique to add a second ignition key. This requires an electronic handheld computer, referred to as Tech-2 which is to be used by the dealer. Then a new key as well as transponder have to be purchased and then programmed to the car.

It is recommended to rotate your keys in order that one does not wear out more quickly than the other. This will keep your keys in top condition.

Replacement Case

The new key fobs do not look like the older Saab keys. They have electronics that make it difficult to copy. This has made theft of cars a lot more difficult than it was twenty years ago. However, it also has made the replacement of lost keys an incredibly costly endeavor.

Saab 9-3 owners must have two keys that work. If one gets lost, it costs a lot to get another one for the vehicle because it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100 and $200 for this.

There are options to avoid the high cost. Some parts providers will use the code of a spare key to cut a brand new metal blade at a fraction the price of the dealer. The key must be the exact same as the original in order for it to work in your vehicle.

You can also change the case yourself by following these steps. You'll require an open-faced screwdriver and patience. With the screwdriver, you can pry apart the plastic, and then take off the emergency key. Once the case is open, remove the electronic components and place them inside your new case. Insert the correct key and badge into the case.

Replacement Battery

The replacement battery for the Saab 9-3 is an affordable part that can be replaced quickly and easily. This YouTube video by Cyclone Cyd demonstrates how to replace the battery of the remote fob with only four steps. This tutorial can be used for any modern saab key fob, however, the procedure may differ slightly.

The first step is to find the button that opens the backup key within the fob. This button is typically located on the back of your fob, just below the Saab Logo. Next use a flathead screwdriver into the tiny hole in this button. This will allow you to open the fob's case so that you can replace the battery.

Once you have installed the new batteries CR1632, you can reassemble the remote key fob. Then, you can program it into your car. The whole process should not take more than an hour. It's a simple process that does not require any special tools.

The process can be a bit more complicated if you lose your key, but it's possible. The dealer will have to determine the VIN of the car and then order a replacement key blade and TWICE module with the exact unique code. After that, they'll have to cut the new key and then program it with an innovative software tool called MDI.

Replacement Key Fob

The key fob has batteries that are used to lock and unlock your vehicle. Batteries have a limited lifespan and will eventually die. It's a common issue with all cars. The good news is you can replace the battery in all key fobs without having to replace the entire case. You can purchase replacement fobs on Amazon that have all the electronics already installed, so you'll be able to just pop open the case and replace those batteries that are old. It is necessary to remove the emergency key before you replace the batteries. To accomplish this, simply insert the screwdriver of a small flat head into the slot that is in the middle of the. Use the screwdriver to move around the case, and it will split open, making it easy to remove.

If you're ready to replace your keys, keep a spare on hand. This can save you a lot of money. If you have a spare you can have the dealer cut an additional key and program it to your car, which is cheaper than replacing the entire key fob.

If you do not have a spare key one, you can add a second key to your car Key repair Shop, however this will require a lot of research and effort. It costs around a hundred bucks to add a second car key. The computer in the vehicle also has to be programmed. This can be done by a professional, but it's a costly option for most owners.

Replacement Ignition

The new saab 9-3 key programming 9-3 uses an alarm system that is more sophisticated built around a key code. This means that should you lose only one functioning key, getting another one can be very expensive because the car needs to have a unique computer module installed, and it must also be programmed to accept an additional key. Locksmiths typically aren't able to program this and dealers will charge hundred dollars just to program the new key!

Dealers will charge you a premium to replace your car computer (also known as the CIM or saab 9-3 replacement key twice) in the event that you lose your only functioning key. We can reprogram the current EEPROM of your car's computer to make it prepared for a new key. This will save you more than 50% of the cost you would pay at a dealer.

If you've been a faithful owner of a 03-11 SAAB 9-3, you likely know that the ignition key isn't the most robust. They can be extremely sticky, and the buttons are known to be ripped off from time to time, so you should consider getting a replacement if yours isn't performing as it should. Luckily, replacing the ignition key isn't as complicated as it seems, and it can be done fairly quickly with the right tools.