Are You Getting The Most You Fiat 500 Replacement Key Cost

fiat key cover 500 Replacement Key Fob

It's possible to change the battery if your 500 remote key fob isn't working. If you replace the battery, but it doesn't work the issue could be somewhere else.

United Locksmith specializes in the creation of new keys for classic cars. We have the tools and parts required for this type of service.

Dead Coin Battery

A dead battery is the primary reason for your Fiat 500 keyfob not locking or unlocking the doors. The battery of the coin cell inside the key fob will drain quickly if you don't use frequently enough. If your remote started to show signs of weakening like a loss of range, and then stopped working completely The battery is probably dead.

The battery inside the key fob is held in place by metal clips that retain it. If the clips aren't tight enough, it could lead to contact issues, which could prevent your remote from receiving power. By using a small flathead screwdriver, pull the retaining clip open to take out the battery and replace it with a new one. Use a battery that has the same size, voltage and specification as the original.

The key fob might also become corroded or damaged through exposure to water. Even a short bath in soapy, warm water can cause damage to the chip. It is best to keep your key fob in a dry location.

Water Damage

If your key fob isn't operating correctly, it could be caused by water damage. Key fobs come with rubber seals that stop them from being damaged by light rain or splashes of water, but it is crucial to keep your car keys from being tossed into the ocean, pool, and the washing machine!

The key fob comes with an electronic chip inside that sends a signal to your car's immobilizer system. The chip is what allows the 500 to lock and start. If it gets wet it will cease to work.

You can try cleaning the inside of your key fob's electronics using isopropyl alcohol, or an electronic cleaner to see if they are still good. It is best to replace a key fob if it is submerged in salt water, rather than trying to fix it yourself.

While a replacement fiat 500 key fob could cost you a little bit of money, it's a lot cheaper than paying for your Fiat 500 to be towed to the dealer for repair! You can also make it yourself by following some simple steps. Be sure to have the correct battery type before you attempt to open your keyfob. You can find step-bystep directions for any car keyfob online.

Faulty Chip

The chip in the key fob communicates with your vehicle's immobiliser to ensure that your car is only able to start when the correct key is inserted. If the chip is damaged, or corrupted, your car won't start regardless of what you do.

A faulty chip can occur due to several reasons, but most often it is due to water damage or a dead battery. It is best to delegate the job to a professional locksmith who will be able to replace the chip in a short time and at a a reasonable price.

If your key fob ceases to function after exposure to clean tap water or rain, take out the battery and wipe down the electronic component with a tissue to ensure it's dry before putting it back in. If the key fob still fails to work it's probably an issue with the chip and will need to be replaced.

Many people will seek out their dealer when in need of a new fiat remote key key fob, but this is a expensive alternative. If you're seeking a cost-effective solution to get your fiat doblo key programming key fob fixed make sure you contact United Locksmith. We have the tools and expertise to repair your Fiat fob in a timely and professional way.

Faulty Receiver Module

Fiat key fobs send a signal to the vehicle that can unlock and close doors (and start the car if it has an automatic transmission) up to 50 feet. There are several reasons why the fob might not function. This can be caused by a dead coin-battery water damage, worn out buttons an issue with the receiver, signal interference, or a malfunctioning chip.

If the fob is in an area that has experienced extreme trauma (such as being dropped onto the hard floor or washed in a washing machine) it might not be in a position to connect with the Body Control Module (BCM) of the car. This is because the BCM is a secure system that can only accept signals from a genuine key and not accept any other.

You'll need to replace the fob if this happens. A professional locksmith will take care of the entire replacement process including programming a new key to your 500. They can even give you a clone fob that works exactly like the original (and costs a fraction of the cost).