See What Ghost Immobiliser Problems Tricks The Celebs Are Utilizing

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable property from theft. It is discreet and doesn't require additional key fobs.

The device makes use of the buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique, changeable pin code sequence that can be up to 20 presses. This will then allow the vehicle to start.

Simple change of PIN code

Many homeowners are upgrading their security due to the increase in vehicle theft. There are a myriad of aftermarket security devices available, from tracking systems to immobilisers and alarms. However they do not all are equally efficient in protecting your vehicle. While a tracking system may assist in finding your vehicle in the case of theft, it will not stop the crime from happening in the first place. Immobilisers, on the contrary is exactly what says on the tin: it shuts down the engine of your car so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it virtually impossible for thieves steal your vehicle.

The Ghost Immobiliser Problems device utilizes the buttons on your car to create an unique sequence that needs to be entered to allow the engine to begin. This can be done using the indicator stalk or window buttons. In addition to this option, there is an app for mobile devices that can act as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is a great option for those who want to offer your car to valet parking or maintenance. The immobiliser will stay active.

The Ghost is an unique and innovative device that works with your vehicle's buttons rather than as a standalone device. It is not only an effective deterrent to vehicle theft however, it can also be used on any future vehicles you own. This makes it a more cost-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security device that shields your vehicle from key hacking and cloning. It also blocks ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be plugged into the vehicle without the need for extra wiring and has been extensively tested to ensure it works with all vehicles. It is also resistant against jamming devices which are a typical method used by car thieves to circumvent immobilisers.

The advantage of CAN data over traditional systems is that they operate silently. It cannot be detected using sophisticated RF scanning and code-grabbing techniques as well as recognized by conventional diagnostic tools. The Autowatch bmw m2 ghost installer doesn't produce LED indicators and instead uses the buttons inside your vehicle such as steering wheel or centre console panels to create a unique, changeable disarm sequence. You can even make this sequence up to 20 presses long to increase security. The iPhone app is limited to one connection, with the Ghost's unique pairing code. the ghost immobiliser fitting near me. All communication between the two devices is secured.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU to bypass the immobiliser. The engine will only start only if a valid PIN is entered. It can also be put into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) so that you can hand your car over to a valet service for maintenance without having to enter a PIN code.

Every vehicle is tested

The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser that is able to be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from operating normally until you enter a specific code. The system can be activated and deactivated through your smartphone's application without the need for additional wires.

Standard factory immobilisers on vehicles function by using a transponder inside the key that sends an electronic signal to the ECU. If the correct code is sent the car will start, but if a transponder is replaced with one from a different vehicle, the immobiliser won't recognize it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of car security systems technology has developed the Ghost immobiliser. It shields your vehicle from hacking, key cloning and even key theft. The only way that a burglar could steal your car is physically towing it away, and even then they wouldn't be able to drive it.

ghost car immobiliser uses buttons on your vehicle, including the indicator stalk, steering wheel, and doors, to generate unique PIN codes that needs to be entered in order to use your vehicle. This is performed without the need for additional hardware like key fobs and can be as long as 20 presses long. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code grabbing techniques to determine if an installation has been made.

Ghost is more difficult to remove than car alarms, which require disarming with a series of buttons. This makes it a perfect alternative to a GPS tracker that can assist in locating your vehicle after it has been stolen.

Override of emergency PIN code

You don't have to look very long on social media sites to find stories or videos about cars that have been stolen using the latest technology tools. This includes key-cloning and hacking devices that allow them to start your vehicle without your original key fobs.

The Ghost immobiliser helps combat this and gives you an additional layer of protection to stop your vehicle from being stolen when it is targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel, and centre console. This unique PIN must be entered in conjunction with your original key fob to prevent the vehicle from getting started. The unique override pin is located on a black card that you will receive after your installation. It is easy to remember since there aren't any LED indicators.

The device is hidden in the vehicle's wiring and does not emit radio signals. This means it can't be detected using diagnostic software which can identify what is ghost immobiliser type of security systems you have installed. This makes it a great alternative to a tracker.

Unlike other security systems, that rely on a relay located in the engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to shut down a vehicle completely, by sending a digital block to the ECU and engine.

These systems can also be connected to a separate analogue alarm, immobiliser or tracker. This should be specified prior to the installation. They are also fully service/valet mode compatible and a good alternative to a tracker when having your car in for repair at the dealership.

Service/Valet mode

In recent times there has been an increase in the number of vehicles being stolen with no owner's keys. It's now more easy than ever to steal your pride & joy due to the availability of key cloning tools & door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if you keys have been cloned.

It communicates directly with your car's ECU (Engine Control Unit), via the data loop called CAN. It's completely quiet since it doesn't utilize radio frequencies or keys fobs. It isn't detected by diagnostics or any other hacking device. It also shields against the possibility of adding a new key or replacing the ECU to bypass the system as only the correct PIN code can allow the engine to start.

The device is hidden inside your car by using buttons on the steering wheel, the centre console and door panels. Before you can start your car, you must enter a unique, changeable PIN code that can be as long as 20 digits.

This is the first aftermarket CAN-bus immobiliser for the market that is being designed. It will stop your vehicle from being driven or started when you don't enter a PIN code first. If you're driving away with the device armed the indicator will flash on your dashboard and flash continuously for around 300m. Entering your PIN code will disable the anti-hijack. Your vehicle will continue to operate just as normal. If you don't enter your PIN code at this time the indication will continue to flash and require a new PIN code for every attempt to start your car.