The Ultimate Guide To Replacing Double Glazed Window Handle

Replacing Double Glazed Window Handle

If you follow the proper steps, replacing a double-glazed window handle should be fairly easy. You first need to identify the type of handle you are replacing and take a measurement of the spindle.

Cockspur handles can still be found on older uPVC window frames, but have a different height than the aluminum equivalents (also known as spade handles). This means that they require a spindle that is longer.

Take a look at the Spindle

In the case of replacing the double-glazed window handle, it is necessary to measure the spindle length to ensure you're purchasing the correct replacement. Spindle length refers to the distance that the handle extends out of the base plate or how far in it goes into the lock. It will vary from handle to handle. When measuring the spindle length it is essential that the handle from before isn't removed because it may be impossible to get a good reading if this is the case.

In general, you can anticipate that a new handle will come with spindle. However, you'll find that the dimensions of the spindle differ among different manufacturers and handles, so it is advisable to verify when purchasing one. To save time and energy, it's recommended to purchase the spindle and handle together.

Espag handles are the most common type in upvc window handle won't close properly window frames. They use a concealed locking mechanism that allows you to shut and open the windows. They are available in a variety of colours and styles to match your home. When you are choosing an new Espag handle, it's important to consider the spindle length as it can make a difference to how secure your window is.

The handles are available in a variety of sizes and can be rotated to the left or to the right, based on your preference. They are a simple and efficient option for your double glazed window.

Another common type of handle is the tilt and turn window handle. These handles are usually large and sturdy, since they lock in two distinct places when opening the windows. These are available in many styles such as stainless steel and chrome. They can also be made from brass or white uPVC to match ironmongery that is already in use.

Finally, there are cockspur handles, which are a more traditional type of window handle, with an elongated spur which pushes upwards against the wedge on the frame. They are a simple and effective option for a double-glazed window and are available in a wide variety of nib and nose heights to accommodate a wide range of profiles.

Remove the Handle

There are a variety of handles for uPVC double-glazed windows. Espag handles are the most commonly used because they have a spindle through them that engages with the locking mechanisms of the frame. Other handles include tilt-and-turn ones which allow you to tilt the window to allow for ventilation or completely open. These handles are usually bulkier and have more complicated mechanisms. However, they offer more security. Certain styles of handles are compatible with key locks, offering extra security for your home.

It is important to inspect the handle prior to replacing it. This will help you determine if a new handle is needed or if the existing handle just needs to be tightened or replaced. If the handle is broken then it needs to be replaced completely.

If the handle is loose, then it may need to be tightened or retightened. Find the screws inside the handle using the aid of a screwdriver and take them out. Make sure you don't use a power tool because this could cause damage to the window frame and the handle. After the screws have been removed, place them in a safe location.

After the handle has been removed from the window frame, you can then remove the old handle and replace it with a brand new one. Start by aligning the new handle with the holes in the window frame. When you are satisfied that they are lined up place the new handle and screw it into the appropriate position.

Test your newly installed window handle once you have finished by closing and opening the window repeatedly. If you notice any looseness or wobbling, then it is crucial to tighten the screw, as this can cause the window handle to become unstable and potentially fall off.

We have a variety of replacement window handles in a range of colours such as black, white and brass. We stock espag handles, inline handles, cranked handles and tilt and turn handles for all types of uPVC windows, timber windows, and aluminum frames. We also offer slimline handles that can be customized to meet your requirements. This is perfect for those who are concerned about space.

Remove the Screws

You will need to remove the plastic covers that cover the screws on the window handle prior to being able to install new handles. They are typically located between the handle and its lower part when it is open and you can take them off with the help of a screwdriver or a fingernail. Be sure to not loose any screws when you remove them. If possible keep the caps in case they're needed in the future during the installation process.

Based on the requirements you have you will find a variety of options for the type of handle you replace upvc window handle. If you're looking for something that's more elegant than the standard handles, slimline models may be perfect for you. These handles are designed to be used on the same spindle as standard handles but are smaller and will not interfere with blinds or shutters. There are stainless steel, chrome and brass options, that can be used to match the other ironmongery in your home.

After you've removed the handle, you can begin creating your new. You'll need to determine the kind of handle you have and then measure the spindle length, before deciding on the replacement. You'll need the new handle to be the right size for your uPVC window and the screw holes must match the holes on your current one.

When you're ready for installing the new handle, you'll need make sure that it is in the open position and that the spindle is placed. Place the holes on the handle with the holes in the window, and then insert the pins or screws. Be cautious not to over-tighten them, as this may cause the window frame crack.

You will have to test the handle by locking and unlocking the window handle Stiff to close. It is recommended to do this several time to ensure that the window lock is working and to check if there are any problems. If you are satisfied with the performance of the new window handle, then you can replace the screw caps and replace the cover.

Fit the New Handle

A uPVC window handle is usually designed to last for many years however, it could be damaged and need replacement. It is essential to determine the reason for damage before making a decision on the next step.

In most cases, a handle that is loose on a window has to be tightened in order to repair it. This involves taking the handle off and locating the fixing screws which hold it in place. They are usually hidden on the inside face of the handle, however they are easily found with a screwdriver or pair of pliers. Once these are removed, you can remove the spindle from the handle.

After the handle that was used has been removed, you can replace it with a new one. It's a simple process however, you must take care to make sure that the screws are securely in place. The handle must also be correctly positioned and locked in place to ensure that it cannot be removed again.

There are various types of handles depending on the size and type of your window. Cockspur handles are available, as well as tilt and turn handles as well as Espag locks. Each has its own features, so it is important to make sure that you use the right handle for your window.

If you are replacing an Cadenza handle, for example, then it is important to make sure that you have an identical handle in terms of blade design and fixing centres. If you are using an angled blade handle when a flat blade must be employed, the blade could break.

Overall replacing a double glazed window handle is a relatively easy process. It is important to remember that there are numerous styles and sizes of uPVC handles. Therefore, you should take measurements of the spindle before buying the replacement handle. By following the steps described above, you should be able to put in the new handle in no time.