What Ghost Immobiliser Problems Could Be Your Next Big Obsession

Protect Your Pride And Joy With The local ghost installer Immobiliser

Guard your precious possessions against theft by using the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs.

The device utilizes buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence of up to 20 presses. This will allow your vehicle to start.

Simple PIN code change process

Many owners are upgrading their security because of the increase in vehicle theft. There are many types of security products that are available from tracking systems to immobilisers and alarms. However, not all of these are equally effective in protecting your car. While a tracking device can assist in finding your car in the event of theft, it does not prevent the crime from happening in the first in the first place. Immobilisers, however are exactly what they state on the tin: they shut down the motor of your car to prevent it from being started. The Autowatch local ghost installer immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to steal your car.

The ghost device makes use of the buttons on your car to create an unique sequence that needs to be entered to allow the engine to start. This can be done by using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their car without having to use the button sequence. This option is particularly beneficial if you have to surrender your car to a valet service or parking, as the immobiliser will remain active and not deactivated.

The Ghost is a very unique and innovative device that is used in conjunction with the buttons of your car instead of being a separate device. This means that it is not only a highly effective protection against theft of your vehicle, but also a transferable device over to any future cars you may own, making it more of an investment than the traditional lock on your steering wheel.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a high-tech security system that safeguards your vehicle from key hacking and cloning. It also blocks ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be plugged into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices which is the most common method used by thieves to bypass existing immobilisers.

The benefit of using CAN data is that it operates silently in comparison to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing technology as well as identified by conventional diagnostic tools. The Autowatch ghost doesn't produce LEDs, but instead utilizes the buttons on your vehicle like the steering wheel or centre console panels to create a unique, changeable disarm sequence. You can create a sequence that is up to 20 presses long for added security. The iPhone app permits only one, authenticated connection with a pairing code that is unique to the Ghost and the communication between the two is secured.

The Porsche 911 ghost installer; Https://dunlap-skaaning.Blogbright.net, also stops car thieves from adding a new key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start only if the correct pin code is entered. It can also be put in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) so that you can transfer your vehicle to a valet service to be serviced without needing to enter a PIN.

Each vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects signals to stop your car from operating normally until you enter a customized code. The system can be activated and deactivated using your own smartphone application without the need for additional wires.

Standard factory immobilisers in automobiles function through a transponder inside the key that sends a signal to the ECU. The car will start if the correct code is sent. If, however, the transponder from another vehicle is used instead, the immobiliser won't recognise it. This allows the vehicle be stolen and started. The Ghost immobiliser was developed by a South African company at the top of security systems for vehicles technology. It protects your pride and joy from hacking, key cloning and even key theft. The only way a thief could steal your car is by physically towing it away and even then they wouldn't be able to drive it.

Ghost makes use of buttons on your vehicle, such as the indicator stalk, the steering wheel, as well as the door panels, to generate a unique PIN code which must be entered to use your vehicle. This is done without additional hardware, like keys fobs. It can take up to 20 presses. It is also inaccessible to diagnostics equipment and doesn't transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanning or code-grabbing technology to detect that the security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks, Ghost is concealed within the vehicle, so it cannot be taken away or disabled by thieves and is even more difficult to get rid of from a car alarm which requires disarming using an action sequence. This makes it a perfect supplement to a GPS tracker that can assist in locating your car ghost immobiliser after it has been stolen.

Emergency PIN code override

You don't have to look far on social media to find stories or videos of vehicles that were stolen using the latest technology tools. This includes key-cloning and hacking tools that allow the vehicle to start without the original keys.

Our Ghost immobiliser fights this and provides you with an additional layer of security to stop your vehicle from being taken in the event of being targeted by thieves. It works by creating a unique pin code sequence that is triggered by the buttons you have on the steering wheel, door panel, and centre console. This unique PIN must be entered along with your original key fob to prevent the vehicle from beginning. The unique override pin can be located on a black card which you will receive following your installation. It is simple to remember since there aren't any LED indicators.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, so it isn't able to be recognized by thieves with diagnostic software that can identify the security system you have installed. This makes it a great alternative to an alarm.

Unlike other security systems, which use a relay in engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This enables them to shut down the vehicle completely with a digital block of commands that is sent to both the ECU and the engine.

They can also be linked to a separate analogue alarm immobiliser or tracker. This should be decided prior to the installation. They are also compatible with service/valet modes and a great alternative to a tracker device when you bring your vehicle to the dealer to address an electrical issue.

Service/Valet Mode

In recent years there has been a rise in the number of vehicles being stolen with the owners' keys. It's easier than ever to take your joy and pride due to the availability of key cloning tools and door lock picks. To prevent this from happening, we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys were cloned or your vehicle has been hijacked.

It connects directly to your car's ECU (Engine Control Unit), via the CAN data loop. It's completely silent because it does not utilize radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also protects you from introducing an ECU or key to circumvent the system, as only the PIN code allows the engine to start.

The device is hidden inside your car and can be reached via the buttons on your steering wheel, centre console and door panels. Before you can start your car, you must enter a unique, changeable PIN code up to 20 numbers.

This is the very first aftermarket CAN-bus immobiliser for the market that is being designed. It will prevent your vehicle from being started or driven when you don't enter a PIN number first. If you're driving away with the device in motion it will display an indicator on your dashboard that will flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to function just as normal. If you do not enter your PIN at this point the indicator will continue to flash and require a new PIN each time you attempt to start your car.